3 In 1 Compact Precision Decoiler Nc Servo Straightener Feeder And Uncoiler
Decoiling - It is the process of unwinding the metal coil from a spool or reel and laying it flat on the machine. The LPG decoiler can handle heavy-duty coils and can unwind them without damaging the metal strip.
Straightening - After the metal coil is unwound, it may have a curved or bent shape, which can affect the quality of the final product. The straightening mechanism of the machine uses rollers and pressure to remove any bends or kinks from the metal strip, making it flat and even.
Feeding - The straightened metal strip is then fed into a stamping or forming machine, where it is shaped into the desired product.
A Typical Combined Straightener Feeder has following properties (Depending on the customer request):
Max strip width: | 1200 mm |
Stock Thickness: | 1.2-4.0 mm |
Feeding pinch rolls: | 2 |
Roll Diameters: | 100 mm |
Feeding Speed: | Max 65 m/min. |
ELECTRICAL INFORMATION
Operating Voltage: | 380 V AC |
Control Voltage: | 24 V DC 3A max. |
Control output: | Programmable 7 set of no-nc relay output (250 V AC, 5A) |
MECHANICAL INFORMATION
Alloyed, hardened and ground feeding rolls material |
Synchronized driving mechanism for top and bottom rolls |
Special design of bearing mechanism |
Synchronized driving mechanism for straightening rolls |
Encoder cylinder and driving mechanism |
What Service Do We Provide?
FAQ
Q: What size of LPG cylinder your machine can produce?
A: 6kg, 12kg,15kgs and 50kgs LPG cylinder for cooking and other size according customers' requirement.
Q: Can you design machines according LPG cylinder technical drawing?
A: Sure, please send your technical drawing to us.
Q: What are the benefits to choose your machines?
A: Our machines are strong and reliable for long term industrial manufacturing
We need to know following information to quote you correct machines:
1. Technical Drawing of the cylinders you want to make?
2. What size of cylinder you want to produce?(such as 6kg, 12kg)
3. What diameter and thickness of the cylinder you want to make?
4. Are you new in this area or you already have some machines in the workshop?
5. Capacity you require, i.e. how many pieces and sizes you want to make per day?